6432 N Ridgeway Ave, Lincolnwood, IL 60712

Mon–Sat 9 AM–6 PMSun closed

Key Fob, Car Key & Module Programming in Lincolnwood, IL

Key fob or module programming without the dealer wait. We program key fobs, smart keys and replacement control modules for most makes, right here in Lincolnwood.

What we program

Key fob programming

Lost a remote, bought a spare, or your fob stopped unlocking the doors? We pair new or replacement fobs to your car so lock, unlock and trunk buttons work again.

  • New and replacement remotes
  • Spare fobs paired to your existing set
  • Button function test before you leave

Smart key and push-to-start key programming

Proximity keys for push-button start cars need to be registered to the car's immobilizer. We handle that without sending you to the dealer.

  • Proximity and push-to-start keys
  • Immobilizer registration
  • Removal of lost keys from the system (when supported)

Transponder key programming

Many keys have a chip that the car must recognize to start. If your car cranks but won't start with a new key, it probably needs programming.

  • Chip key programming
  • Spare key setup

ECU, PCM and module programming

When an engine computer (ECU/PCM), transmission module or body control module is replaced, it usually needs to be programmed to your car's VIN and software. We program and configure replacement modules.

  • Engine and transmission computer programming
  • Body control module setup
  • Software updates when available

Module setup after repairs

Some repairs, like a new battery on certain models, throttle bodies or steering angle sensors, need a relearn or calibration afterward. We complete these so everything works as it should.

  • Relearns and calibrations
  • Post-repair module checks

Makes and models we support

We program keys and modules for most popular makes, including Toyota, Honda, Nissan, Hyundai, Kia, Ford, Chevrolet, GMC, Jeep, Dodge, Ram, Chrysler, Subaru, Mazda and Volkswagen. Some European and luxury models require dealer-only access; call us and we'll tell you before you come in.

Bravura vs. the dealer

Bravura AutomotiveDealer
AppointmentUsually within about 4 daysOften weeks out

| Also does | Repairs and detailing on the same visit | Varies |

What to bring to your appointment

  1. 1

    All the keys you have for the car. Some cars erase existing keys during programming, so every key needs to be present.

  2. 2

    The new key or fob, if you bought one. Ask us first, because some online fobs are the wrong frequency or can't be reprogrammed.

  3. 3

    Photo ID and registration or title, so we can confirm ownership.

What customers say

★★★★★
“Excellent work! Leaves the cars looking like new. Very much recommended!!!”
Jorge C. · Google review
★★★★★
“I used Bravura for the first time a few weeks ago and I was not disappointed. They provided an easy way to drop the car off and cleaned my car's interior well and also did an engine clean for the first time ever on my car. I will not hesitate to get my car detailed here again. They were super respectful and professional.”
Aa · Google review
★★★★★
“The service I received was excellent. Good price.”
Hector N. · Google review

Key programming near Lincolnwood, Skokie and the North Side

Visit us at 6432 N Ridgeway Ave, Lincolnwood. We help drivers from Skokie, Evanston, Niles, Morton Grove and Chicago's North Side.

Areas we serve

  • Lincolnwood
  • Skokie
  • Evanston
  • Niles
  • Morton Grove
  • West Ridge
  • Sauganash
  • North Park
  • Peterson Park
  • Albany Park
  • Rogers Park

Key fob and programming FAQ

Can you program a key fob I bought online?

Often, yes, but not always. Many online fobs are the wrong frequency or already locked to another car. Send us the part number or a photo before you buy, and we'll tell you if it will work.

How much does key fob programming cost?

Smart keys and module programming vary by vehicle, so we'll quote your exact car.

How long does it take?

Most key fob programming takes under an hour. Module programming can take longer depending on the vehicle.

What if I lost all my keys?

Call us with your year, make and model. For many vehicles we can program a new key even if you have none, but it depends on the car.

Do I need to reprogram a fob after replacing the battery?

Usually not. If it still doesn't work after a battery change, it may have lost its pairing and need reprogramming.

Get your keys working again

Tell us your car and we'll confirm we can program it.

CallBook now